Ball press

product presentation
The carbon powder ball press is mainly used to press the powder material which is difficult to form. It is characterized by high forming pressure, adjustable rotation of the main engine, and equipped with screw feeding device. Mainly used for: carbon powder molding, pulverized coal molding; dry powder molding; desulphurization gypsum molding; coke powder molding; iron chip molding.
Superiorities
Carbon powder ball presser can be used to press pulverized coal, iron powder, coking coal, aluminum powder, iron chip, iron oxide sheet, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke powder and other powder, powder, waste, waste residue, widely used in refractory, power plant, metallurgy, chemical industry, energy, transportation, heating and other industries.
principle of operation
main motor: pass through V belt to reducer: reducer pass through coupling, transfer to drive shaft and then by a pair of open gears, ensure two-roll shaft synchronization (equal speed opposite) where the passive roller is held up by the piston of the hydraulic cylinder (constant pressure type is held up by inclined iron), the system pressure is guaranteed by the hydraulic circuit and hydraulic control valve and accumulator, the material is uniformly entered into the hopper of the molding machine by the storage bin through quantitative equipment, and the unit forming pressure of the compressed material for the roller running at equal speed is changed from small to large, and the forming pressure reaches the maximum at the center line of the roller is reached, After the material passes through the line, the forming pressure quickly becomes smaller, so that the material passes through the ball state and smoothly takes off the ball.
technical parameters